Fairings for CB400F?

[Mikep328]

Did anyone produce fairings for these bikes? - surely someone did!  Any info on them/are any still made?

[McCabe-Thiele (Ted)]

Only seen photos of the headlamp type fairing.

[Bryanj]

Hondastyle made by Rickman and several headlamp types back in the day, you will be lucky to find a straight on fit one now

[Athame57]

I don't know what type you want, but I considered an Asahi canvas one, they are nearly universal things. A CB400F would probably want fork gaiters and canvas saddle bags (throw overs) to go with it. I give it a thought myself, but I'd spend the money doing other things for the bike first.

[Mikep328]

I was thinking something like this: https://www.bike-urious.com/wp-content/uploads/Dunstall-Norton-Commando-Fairing.jpg

I'm not super serious about this - just casually thinking.  This 400 is the PERFECT moto for me here in the UK for what we do.  So I don't want to do anything that would compromise how it feels/rides and most fairings like the one in the pic would require clip-ons and I don't really want to deal with that on a daily rider.

[SteveD CB500K0]

You need to do an internet search for a Rickman Type 1

I will see if I can find a photo of my room-mate’s 400 at Uni.


Sent from my iPhone using Tapatalk

[K2-K6]

Appears to one of that "ilk" for sale currently

https://www.ebay.co.uk/itm/335415914119

[andy120t]

In the eighties my friend had a Rickman fairing and top box on his CB250 Superdream. The top box was adorned with a cardboard hand designed to flick the middle finger when a fishing wire was pulled....

[SteveD CB500K0]

Appears to one of that "ilk" for sale currently

https://www.ebay.co.uk/itm/335415914119

That’s the touring version. Type 3 (?)


Sent from my iPhone using Tapatalk

[ka-ja]

i have a mk 1 rickman laid in the garage, needs a bit of work though.

[SteveD CB500K0]

i have a mk 1 rickman laid in the garage, needs a bit of work though.

Does it have the mounting brackets. They hooked around the tank mounting points (had to cut down the rubbers). They were impossible to find.


Sent from my iPhone using Tapatalk

[ka-ja]

It Has a mounting bracket that would need "doctoring" as it was  originally altered for clip ons, it mounts on the horn area frame web and the front downtube, probably not originally for a 400/4, its 40 yrs since I used it, a long time to remember!!

[TrickyMicky]

If you do fit a fairing and have to make your own brackets, please make sure that they are man enough for the job and mounted to something substantial. Vibration and wind pressure can wreak havoc after a while, and then what normally happens is they break and the fairing just drops and gets trapped under a wheel.  Sad memories of Ian Ashwell at the 1968 Brighton Speed Trials.  Stay safe everyone.

[Laverda Dave]

I had a 1/2 length Rickman fairing on my original 400/4 back in the very early 80's. It was a bit like the Polaris fairing without the lower panels and had very substantial fixings to the forks and handlebars. I bought the bike with all the luggage fitted as it had been used for touring by the PO. It had a small opening compartment on the front above the headlight. I went with a mate (who's 400/4 I now own) to Wells-next-the-Sea for a weekend. The bike was very lightly loaded. On the way home home we were on a motorway and we overtook some cars at about 80ish. When I went back in to the inside lane and dropped back down to 70 the bike went into a violent and uncontrollable tank slapper, it took me across the three lanes of the motorway and nearly into the central reservation. It was caused by the fairing being so large and heavy as it was double skinned.
I removed the fairing and all the luggage after that episode and never had a problem again. I was lucky the bike was a 95MPH red F and not the125MPH Parakeet Yellow F2, who knows what could have happened at those warp speeds  . At least it cured my constipation

[Aye Gee 1977]

Image of a contemporary fairing on a bike I bought new in 1977.

The fairing was added after a couple of years.  It is branded Honda but I think Rickman was the manufacturer.  The bike was ridden to exhaustion before being consigned to the back of the garage in 1983. It took me a mere 40 years to start the restoration.

Does anyone have a good rear mudguard outer, please?