SOHC.co.uk Forums > CB350/400

Wiring

<< < (2/2)

McCabe-Thiele (Ted):

--- Quote from: Madgrandad on May 23, 2024, 05:15:06 PM ---Ted, so what your saying I have to solder a green earth wire to the inside of the indicator earthing plate and run that to the loom?

--- End quote ---

If I remember correctly I drilled a small hole on the bulb holder plate  then screwed a wire to the plate via an eye connector.
I might have used a small pop rivett it was a couple of years ago.  Then as you say ran the wire inside the front headlamp cross tube and into the headlamp bowl to the earth terminal that acts like a captive nut holder for the headlamp fitting side bolt.

Madgrandad:
Yes that's what I thought. Thanks for your help Ted 👍

Navigation

[0] Message Index

[*] Previous page